VICAFLOOR-SL520

VICAFLOOR-SL520

Vicafloor-SL520 is a one component, Cementitious abrasion resistant Topping based on Vicat Special Binders, graded Quartz fillers, mineral additives and admixtures.

Tags
Categories,

Description

Vicafloor-SL520 is a one component, Cementitious abrasion resistant Topping based on Vicat Special Binders, graded Quartz fillers, mineral additives and admixtures. When mixed with water, it produces a Free Flowing, Heavy Duty Topping for levelling, repairing & renovation of Concrete floors for thicknesses ranging from 4mm -30mm.
Vicafloor-SL520 Can be grinded to expose the aggregates & dry polished using diamond disks after only 24h to a very shiny surface. Vicafloor-SL520 is classified as CT-C60-F6-A15 According to BS EN 13813:2002.

Advantages

  • Fast Setting and drying.
  • Self-Levelling with good air release.
  • 4 hours walk on time (+20°C).
  • Very low shrinkage minimizes cracking risks.
  • Joint-less flooring can be achieved due to low shrinkage.
  • Flowable with maintained consistency during its pot life.
  • High early strength with long term strength gain.
  • Reduced porosity enhances the resistance against carbonation & chloride penetration.
  • Good sulfate resistance after full curing.
  • Good resistance to chemicals of PH ≥ 4.
  • Water resistant, No strength loss under water.
  • Characteristics improvement over 10 years due to the slow hydration of Dicalcium Silicate (C2S).
  • Application thickness from 4mm to 30mm.
  • Self-Curing in normal condition. (No wind or heat)
  • Easy to use and economic.

Uses

Vicafloor-SL520 provides a durable, seamless, high strength, abrasion resistant floor.
Vicafloor-SL520 is ideally suitable either where the floor is subjected to severe conditions of service, or where ever a luxury floor is required such as ware houses, storage depots, supermarkets, garages, shopping centers …etc.
Vicafloor-SL520 Can also be used as a Flowable repair material.
Vicafloor-SL520 is supplied in different colors enabling decorative designs to be applied.

Coverage

  • After mixing with water, the 25 Kg pack yields about 12.5 liters of Flowable mortar covering about 2.5 m² of 5 mm thickness on an even surface. Consumption rate might vary depending on the surface roughness.
  • Allowance should be made for any possible wastage when estimating.

Package

  • Vicafloor-SL520 is supplied in 25 Kg packs.

Downloads

📄Downloads
• Safety data sheet
• Approvals
• Method of statement
• Specification

Related products

Recently viewed products