VICAFLOOR-SL510

Vicafloor-SL510 is a one component Cementitious Self-Leveling Topping based on Vicat Special Binders, siliceous graded aggregates, mineral additives and admixtures.

Categories

Description

Vicafloor-SL510 is a one component Cementitious Self-Leveling Topping based on Vicat Special Binders, siliceous graded aggregates, mineral additives and admixtures.
When mixed with water, it produces a Highly Flowable, Heavy Duty Topping for levelling & smoothing Concrete floors for thicknesses ranging from 3mm -12mm, higher thickness up to 100mm can be achieved by the addition of suitable aggregates. Vicafloor-SL510 Can be dry polished after only 24h to a very shiny surface. Vicafloor-SL510 is classified as CT-C50-F5 According to BS EN 13813:2002.

Advantages

  • Fast Setting and drying.
  • 4 hours walk on time (+20°C).
  • Very low shrinkage minimizes cracking risks.
  • Highly Flowable with maintained flowability during its pot life.
  • High early strength with long term strength gain.
  • Characteristics improvement over 10 years.
  • Application thickness from 3mm to 12mm (Can be extended).
  • Easy to use.
  • Very good air release.
  • Smooth surface profile.

Uses

Vicafloor-SL510 provides a durable, seamless, high strength, abrasion resistant floor.
Vicafloor-SL510 is ideally suitable either where the floor is subjected to severe conditions of service, or where ever a luxury floor is required.
Vicafloor-SL510 Can also be used as a heavy duty underlayment.
Vicafloor-SL510 is supplied in different colors enabling decorative designs to be applied.

Coverage

  • After mixing with water, the 25 Kg pack yields about 14.0 liters of self-leveling topping covering about 4.0 m² of 3 mm thickness on an even surface. Consumption rate can slightly vary depending on the surface roughness.
  • Allowance should be made for any possible wastage when estimating.

Package

  • Vicafloor-SL510 is supplied in 25 Kg packs.

Downloads

📄Downloads
• Safety data sheet
• Approvals
• Method of statement
• Specification